Re-designing your house? Or are you planning on adding some extra resources to your home? And you need to work with baseboards? Guess what? You’ve come to the perfect place. We have come up with a list of the Best Miter saw for baseboards.
We have picked the best of best saws that will have your work done in no time at all. Sometimes working with these types of things may seem a little complicated. Even if you are an expert, you may not be able to come up with the best results if you cannot work with the best types of equipment.
So, without any delay, shall we start?
5 Best Miter Saw For Baseboards In this Year
1. DEWALT 12″ Compound Miter Saw Review
The work-horse of Saws. It is first the saw we have on our list is the DEWALT Sliding Compound Miter Saw. This has taken the top position of Best Miter saw for baseboards for the features it has.
Let’s have a look at the features.
Dimension
The dimension of the item is around 17 inches in height, 24.75 inches in length. The saw weighs almost 56 pounds. Its maximum cutting thickness is 6.75 inches.
Blade
The blade is the most basic part of a saw. A good blade can change the speed of your work. This saw has a 12-inch sliding blade.
Motor
The saw has a 3800 RPM motor. Although RPMs don’t matter. They are put so that the speed of the motor can be determined. So, the RPM helps to understand how fast the motor shaft spins.
Dust collection system
As you will work with a baseboard, it will create a ton of dust. And cleaning everything isn’t that easy. To solve this issue, DEWALT features a dust collection system. This system collects almost 75% of dust, which makes cleaning easy.
Back Fence design
The exclusive design is why this saw being in the list of the best Miter saw for baseboards. The saw has an amazing back fence design that can cut up to 2 x 14-dimensional lumber at 90 degrees. And also cute 2 x 12 at 45 degrees.
Warranty
This ideal piece of saw has a warranty of 3 years or 36 months. All this together seems quite a good deal.
What We Liked
- It can effortlessly cut up to 6.75 inches
- 1 inch Arbor size
- 3800 RPM motor
- Reliable back fence design
- A super-efficient dust collection system
- Easy to clean and maintain
- 36 months of warranty.
What We Didn’t Like
- The saw does not come with an LED or Laser cutting guide.
2. Best CRAFTSMAN V20 7-1/4″ Miter Saw
The second on the list of best Miter saw for baseboards; we have the CRAFTSMAN V20 Sliding Miter Saw.
Let’s dig into the features, shall we?
Dimension
This saw weighs around 21.8 pounds. The dimension of the saw is 25.59 x 19.06 x 14.41 inches (approx.) .
Voltage
The voltage of the saw is around 20V. So, no worries about losing much energy.
Battery
CRAFTSMAN V20 features 1 number of lithium-ion batteries. This is included in the kit. Lithium-ion batteries let you work effortlessly, so they’re always a good option.
Maximum Capacity to cut
It can cut up to the thickness of 3-⅝ inches nested crown and 3-½ inches baseboard without any effort. The saw also has side carry handles, so this part of the unit is portable. The slide capacity allows you to cut 8 inches. Cross-cut at 90 degrees and 5.5 inches.
Motor
The saw features an 800 RPM motor. As we have told you before, the value of RPM Capacity doesn’t matter much. But, the value depicts the speed of the motor shaft spin.
Warranty
Along with all the other features, you get a 36-month manufacturer warranty.
What We Liked
- Light-weight
- Requires less energy to run
- Features side carry handles
- Speed is 800 RPM
- Warranty for three years or 36 months.
What We Didn’t Like
- The Lithium batteries may need to be changed after multiple usages.
3. Best SKIL 12″ Compound Miter Saw Review
The next saw we have on our list is the SKIL 3821-01. BOSCH has a reputation for making extremely good equipment.
Without any further delays, let’s get into the features.
Dimension
The length of the item is 28.28 inches. The width is 18.15 inches, and the height is around 20.5 inches. And the weight of the saw is 46.34 pounds.
Laser cutline
The SKIL 3821-01 features a laser cutline for a quick and accurate cut. As the laser is pre-installed, there’s no need to get an extra LED or laser.
Motor
SKIL 3821-01 is designed with a 4500 RPM motor. The RPM is the speed of the shaft spin. Also, the motor is 15 amp, but it is pretty powerful.
Multiple Miter angles
The saw features nine position stop settings so that you get all the Miter angles. So now you can complete your project without any issues.
What We Liked
- Designed with a laser cutline
- 4500 RPM motor
- Quick-mount system
- Easy to set up
- Easy to clean
What We Didn’t Like
- It is quite costly.
4. Best TACKLIFE 10″ Sliding Miter Saw Review
The game-changer is here. On the list of best Miter saw for baseboards, we present you the TACKLIFE 10-inch Sliding Miter Saw. TACKLIFE can be listed as one of the best Miter saw for the homeowner.
. We cannot wait to tell you the features. Let’s begin, shall we?
Dimension
The length is 30.7 inches, the width is 22.8, and the height is 17.7 inches. It weighs around 31.5 pounds.
2 adjustable speed
The saw comes with a built-in switch by pressing, which you can easily adjust the speed you require. It can also be used professionally. The higher speed is for wood, and the lower speed is for metal.
Blades
Tacklife Miter saw it has three different blades. Two 10-inch 40T TCT blades for wood and plastic. The other one is a multifunctional 10-inch 48T blade. Rich accessories help you get a better result.
Bevel cutting and laser
The free bevel range is from 0-45 degrees and allows you to cut in all angles. There is a laser attached to track real-time position that gives you precise cutting accurately.
Dust-free environment and extension table
The saw features an additional chip bag that helps to collect the sawdust instantly. An extension table, along with vice clamping, gives you better balance and support.
What We Liked
- Light-weight
- Easy to clean
- Three blades
- Easy speed controlling
- Comes with a red laser and extension table.
What We Didn’t Like
- The accuracy may not be 100% correct.
5. Genesis 10″ Compound Miter Saw Review
We are at the very last item of our article. The last item on our list is the Genesis GMS1015LC. So, without any delay, let’s look at the features.
Dimensions
The item’s dimension is 19.5 -inches in height, 16.25-inches in width, and 15-inches in height. It weighs around 1 pound, which is lighter than any other saw you can find.
Bevel cutting and laser
You can easily make bevel cuts up to 45 degrees left and right in no time using this saw. A laser cutting guide helps you cut more precisely and improves accuracy.
Blades
The length of the blade is around 10-inches. There is a built-in electric brake that stops the blade and Arbor lock for quick blade changes. The 60T Carbide blade installed in the saw is good for everything. This can be considered as one of the Best Miter saw for furniture making.
Motor
Genesis GMS1015LC has a 4600 RPM motor which is versatile for every project.
Batteries
The Genesis GMS1015LC is manufactured with Alkaline batteries, which are included in the kit.
What We Liked
- 10-inches solid blade
- 4600 RPM motor
- Electric brake and Arbor lock
- Laser guide for accuracy
What We Didn’t Like
- Clamp design needs to be changed.
Best Miter Saw For Baseboards Buying Guide
Blades
The blade is the most vital part of a saw. The blade of a saw is something that determines the depth of the cut. Miter saws usually have a blade that is somewhere between 8-12 inches. There are multiple blades available for different materials. And some of them are multipurpose. You can simply use them on baseboards, mild steel or wood.
Sliding Saws
Miter Saws are well-known for their sliding action. Saw sliding actually gives you the opportunity to cut wood with greater widths. You can do various types of things as per your requirement.
Bevel
If you have a minimum about saws, then you must know that some saws have a single or double bevel. This means that the piece of wood will not require moving, and the blades will cut according to your need. The beveling helps to cut complex angles with ease. Beveling makes building furniture easy as a piece of cake.
Dust extraction
Dust extraction is a common feature. As you are working on a project, you will notice a huge amount of dust is created. The dust extraction unit controls the spreading of the sawdust. As a result, you need to spend less time cleaning.
Other features
Apart from all these, Miter saws come with various other features. Some of the Miter saws come with built-in lights and a laser. The laser helps in marking lines all along with the wood. Some pieces also come with variable speed dials. This feature lets you set the speed of the motor that suits you the best. Also, some Miter saws give you the facility of adjustable rear fences, extension arms etc.
frequently asked questions
Can Miter saw make straight cuts?
Answer : Power Miter saws are made for angled cuts, but they can make straight cuts. If you’re a beginner, check out this link before you start working on your project: https://youtu.be/7fjHvYy5lkg
What is the best Miter saw for beginners?
Answer : Miter DEWALT saw is the best Miter saw for beginners. It is designed in a way that everything seems like child’s play.
Is it possible to place a Miter saw on the floor?
Answer : Yes, it is very much possible to use a Miter saw on the floor. You must also keep in mind that using this on the floor may create some issues like holding the board or so.
Does a Miter saw need to be bolted down?
Answer : No, not really. You do not require to bolt down your Miter saw for working.
Are Miter saw worth buying?
Answer : If you look a bit into things, you will know that getting a Miter saw is always worth it. For your better understanding, please check the link attached below: https://youtu.be/zToKUfPk_70
Conclusion
Time to wrap things up. We are at the end of our article on the best Miter saw for baseboards. These are the fascinating eclectic saws that you may find helpful. We hope we could help you with all the information you required. Choose the one that you find ideal for you and your projects.
Good luck!