Top 5 Best Chainsaw Bar and Chain Oil of 2019
Are you in forestry or any other job that requires heavy use of a chainsaw? What do you use to lubricate your saw’s bar or chain?
Some people still use motor oil. What they don’t know is that motor oil is not an effective lubricant for your saw chain. Chainsaws require something stickier.
Read the article to have your pick of the chainsaw bar and chain oils currently on the market.
Oregon 54-026 Chain Saw Bar and Chain Oil
Why You Need Bar and Chain Oil
Like I said, some people still use motor oil to lubricate their chainsaws. While motor oil is not a bad substitute now and then, it’s wrong to use it regularly. Over time, this will cause problems; and in the end, you will have to replace your chainsaw or some of its parts.
You see, the problem with motor oil is that it’s not viscous enough. With chainsaws, high viscosity is the main thing you are looking for in a lubricant. When a lubricant is viscous, it adheres properly to the lubricated surface. The professional term is “tackiness”.
So every lubricant I will review here is extra tacky and far better than motor oil when it comes to chainsaws. That’s because these oils contain a blend of sticky additives which make them super tacky.
Where motor oil would drip or splatter all over the place, these lubricants will adhere. The test of a good chainsaw lubricant is how well it fares in hot weather.
That’s when the oil begins to lose that coveted tackiness and begins to drip. So observe the oils you use. The one that keeps sticky even in the hot weather should henceforth become your go-to chainsaw bar and chain lubricant.
Best Chainsaw Bar and Chain Oil
1. Oregon 54-026 Chain Saw Bar and Chain Oil Review:
If you are looking for a lubricant that will draw out maximum power from your chainsaw’s engine, the Oregon 54-026 Chain Saw Bar And Chain Oil is what you need.
The oil also reduces friction in the chains, which will automatically quicken the cutting time. Where you were taking ages to cut down a piece of wood, you will now saw through it with ease.
The lubricant has a high film strength. That means it retains its strength and effectiveness in spite of load, speed, and temperature. This quality ensures the oil’s success in preventing the wear and tear of chain links and bars.
The high film strength also enables the oil to protect your saw’s metal parts from rust and corrosion.
When you use your chainsaw in cutting trees; after a while, deposits of sap, gum, and pitch begin to accumulate. This can become a headache for you as it makes the saw harder to use.
But with this Oregon bar and chain oil, you can spare yourself this annoyance since the lubricant is designed to resist the buildup of such deposits.
Most lubricants become drippy when temperatures are high. This chainsaw oil has a built-in tackiness that prevents it from “throwing off” even in extreme weather. The tackiness ensures the oil adheres wonderfully to the saw bar and chain.
Furthermore, this lubricant is suitable for all weather conditions, whether summer or winter.
- Is extra tacky to prevent throw-off.
- Has high film strength.
- Corrosion resistant.
- Resistant to deposit buildup.
2. Husqvarna 610000023 Bar & Chain Oil Review:
This Husqvarna lubricant can work well for all chainsaws. One of its stunning benefits is its tackiness. The oil comprises a premium blend of base stocks and tackifier additives which are guaranteed to reduce the high-speed throw-off that you find so annoying with other lubricants.
That means the oil is safe to buy in all weather, even when it is scorching. You can rest assured that it won’t become super drippy.
When you apply it to the bar or chain, it will not trickle off like a thin liquid. It will retain its viscosity.
We use chainsaws to do hard work – cutting down trees and so forth. Naturally, sooner or later, the tool begins to give in to wear and tear. Before you know it, you have to purchase a new chainsaw. With this Husqvarna chainsaw oil, you can delay that for a long time.
The oil will enable you to squeeze out every drop of life within your chainsaw. When you use it regularly to maintain your saw, you extend the life of the saw’s bar, chain, and sprocket, and save yourself dollars you would have spent in repair or replacement.
The lubricant also puts your chainsaw in the best state to perform when you are cutting wood. By minimizing the heat and friction generated, the oil enables you to saw through your day’s quota quickly and efficiently.
- Reduces heat and friction to optimize the saw’s cutting performance.
- Super tacky to reduce high-speed throw-off.
- Prolongs life of saw’s bar, chain, and sprocket.
3. Poulan Pro 952030204 Bar and Chain Oil Review:
Are you fed up with the chainsaw oil you’ve been using?
Like when you apply the lubricant, but just when you have gotten into your groove sawing, the chain begins to smoke.
This Poulan chain oil is the answer for your grief. It is extra tackier and heavier, and you can get it at an affordable price. When you apply it, the tacky oil will stick to the lubricating surface for a long while.
So you can get into a heavy cutting session without worrying that you will have to at some point cut your concentration to reapply the lubricant.
And if you tend to forget your chainsaw outdoors frequently, this is the chainsaw oil for you. Leaving a chainsaw outside puts it in a vulnerable position to be rained on or covered in dew, which would cause heavy corrosion.
But once you lubricate your chainsaw with this Poulan bar and chain oil, you are practically out of the woods. It is built to prevent rust.
The oil is favored by many professionals in the logging industry due to its effectiveness. Where other oils may lose their stickiness in hot weather, this lubricant is made with a strong resistance to high temperatures.
It also flows with ease when temperatures are low, where other oils would freeze. And if you are looking for oil that can resist extreme temperatures, this is certainly the oil you are looking for.
It will prevent your chain from jamming and protect it from wear and tear.
- Resists high temperatures.
- Flows well in low temperatures.
- Resists extreme pressures.
- Corrosion resistant.
- 1 gallon.
- Keeps chain from jamming.
- Reduces wear on chain.
4. Husqvarna Forest & Garden 610000161 Gallon Chain Saw Bar/Chain Oil Review:
What do you look for in a bar and chain oil? Something greasy, slimy, tacky, and so forth. Something well engineered. That’s what you get with this Husqvarna chain oil.
Most of the people who have used it report that it works exactly as they expect a good lubricant to operate.
This premium lubricant won’t disappoint you. Where substandard oils will stick on the chain for a while before dripping off after you begin using, this one adheres correctly. It contains a blend of base stocks and tackifier additives that make it sticky and non-drippy.
Once you apply it, you can rev up the chainsaw and get in the zone without experiencing high-speed throw-off. It will give you best performance with all Husqvarna chainsaw models.
You will get much more value for your money than if you try to use motor oil instead. This chain/bar oil is specially built to guarantee the stickiness chainsaws require.
It will also extend the lifecycle of your chainsaw’s chain, bar, and sprocket. Instead of succumbing quickly to wear and tear, your Husqvarna chainsaw will give you excellent performance for years to come, provided you keep lubricating it with this oil.
And if you are looking for something that will improve your speed of sawing, don’t pass by this chain oil. Reducing heat and friction, it optimizes the saw’s cutting performance. You might just double your productivity.
- Reduces heat and friction.
- Contains a premium blend of base stocks and tackifier additives.
- Extends the life of a saw’s bar, chain, and sprocket.
- Designed for use with all Husqvarna chainsaw models.
5. Makita 181119-A Commercial Grade 1-Quart Chain Saw Bar Oil Review:
If you are in forestry or you regularly work with chainsaws and are looking for a commercial grade chainsaw bar oil to lubricate your saw, you should consider trying this Makita chain/bar oil. The quality of it is at the professional level.
Some folks cheap out and use motor oil instead of chainsaw bar oil. But motor oil does not have the properties of a good bar oil like this one.
As a result, their chainsaw’s bar begins to wear out since it lacks proper lubrication. And the chain begins to overheat, stretch, and eventually wear out. Before long you have to replace your chainsaw.
This commercial grade 1-quart Makita chainsaw is highly affordable, and the service it provides is worth every penny.
The oil works well with all Makita DCS chainsaw models. It is sold separately from the saw. It comes in a 1-quart container.
- 1 quart.
- For lubricating all DCS chainsaw models.
- Extends the life of the bar and chain by reducing wear.
How to Add Bar and Chain Oil to Your Gas Chainsaw
And that’s a wrap. Five of the finest chainsaw bar and chain oils you will find on the market today. Any of them will do quite well with your chainsaw.
If your chainsaw is manufactured by any of the brands I have mentioned, the oil produced by that same brand will be most suitable for that saw. For instance, a Husqvarna chainsaw is best served by the Husqvarna lubricants you have read about in this article.
That said, most of the lubricants will work well with all chainsaws. Also, consider your chainsaw manufacturer’s recommendation.